How to Fix Error 0x8007065E: Data of This Type Not Supported

Wondering how to fix error ‘0x8007065E: Data of this type not supported’ on your PC?

There you are, sitting in front of your computer, preparing to get started on your daily tasks. Your operating system notifies you about installing the latest updates and with a heavy heart, you head to the Updates section. You click on the pending updates to install them and – Beep! Blip! Buzz! – error code 0x8007065E appears on your screen.

Experiencing errors while installing the latest Windows updates is nothing new for Windows users. 

The error code ‘0x8007065E: Data of this type not supported’ is typically caused by system file corruption and mostly occurs in Windows 7. If you are facing it too, then you are in the right place. 

In this guide, we will walk you through the relevant troubleshooting steps in detail, so that you can get your system back on track in no time. 

Let’s get started. 

1. Fix SoftwareDistribution Folder.

In most cases, corrupt installer files in the SoftwareDistribution folder cause error code 0x8007065E. 

An easy way to fix this issue is by renaming the SoftwareDistribution folder and then installing the updates again. This will force Windows to recreate the folder, thus resolving the error in the process.

Here is what you need to do:

  1. Click on the Windows icon and type cmd in the search bar.
  2. Click on Run as administrator to launch Command Prompt with administrative privileges.
  3. In the Command Prompt window, type the commands mentioned below one and hit Enter after each for execution. 
Error 0x8007065E
REN C:\WINDOWS\SoftwareDistribution SDOLD
Error 0x8007065E
Error 0x8007065E
  1. Now, wait for at least 15 minutes before restarting your computer. Once your system is restarted, wait another 10 minutes. Now navigate to Windows Updates to check for the pending updates. 

If corrupt files in the SoftwareDistribution folder were causing the issue, then following the steps mentioned above will hopefully resolve the issue.

2. Rerun the Failed Updates.

It is common for temporary bugs and glitches to prevent you from performing the desired functions. Fortunately, these issues are easy to fix, and most of the time a simple restart or refresh will do the trick.

Several users were able to fix the issue by rerunning the failed updates, which is why we encourage you to give it a shot. 

Here is what you need to do:

  1. Click on the Windows icon on the taskbar and type Control Panel in the search bar. Hit Enter to launch Control Panel.
  2. Inside the Control Panel window, click on View update history and check for failed updates.
Error 0x8007065E
  1. If you find any failed updates, install them manually one by one. 

Hopefully, this will fix the error code at hand.

3. Disable Windows Firewall.

If you have Windows Defender Firewall or any other third-party security program installed on your PC, there is a high possibility that it is causing the error.

Overly protective security applications may block legitimate users from carrying out certain tasks and therefore cause the problem. If this applies to your case, then temporarily shutting down the security programs will solve the problem. 

Once you have performed the desired task successfully, you can enable them back on Windows.  

Below we have outlined the steps to disable the Windows Firewall. Although the steps for performing the same function may differ between third-party applications, the basic concept remains the same.

Here is what you need to do: 

  1. Click on the Windows icon on the taskbar and type Control Panel in the search bar. Hit Enter to launch Control Panel.
  2. Inside the Control Panel window, select System and Security.
  3. Now select Windows Defender Firewall and click on Turn Windows Firewall on or off from the left panel.
Error 0x8007065E
  1. Click on the bubble next to Turn off Windows Firewall (not recommended) and hit OK to save the changes.
  2. Now try installing the updates again and check if the issue is resolved.

If Windows Defender Firewall was causing the error at hand, disabling it will allow you to install the updates without any issues.

4. Try Using CleanMyPC.

You may also encounter errors like code 0x8007065E with bugs and or viruses caused by corrupt files. If Method 1 did not work for you, then decluttering your PC using a reputable PC cleaner can resolve the issue. 

A PC cleaner detects and fixes corrupt or damaged files on your computer, including those located in the Windows Registry, without the user having to take any action. However, it is crucial the PC cleaner you use is able to perform these advanced functions. 

For those who have trouble finding an effective cleaner, we recommend CleanMyPC.

Install CleanMyPC on your PC

CleanMyPC’s system-maintenance tools enable you to fix even the most complex computer problems. You simply need to install the software and run the scan. The rest will be taken care of!

If this is something your PC is in desperate need of, install CleanMyPC now and give your PC a much-needed performance boost.

 Try CleanMyPC Now!

5. Run SFC and DISM Scans.

As we discussed above, the error can occur due to corruption errors within the system. 

Luckily, Windows comes with several built-in troubleshooting utilities that scan the operating system, identify the issues, and resolve them with little to no user input. Two such utilities are System File Checker (SFC) and Deployment Image Servicing and Management (DISM.exe) tool. Both of these are command-line tools, which means that you can use them via Command Prompt. 

Here is how you can run SFC and DISM scans on your PC:

  1. Type cmd in the search bar and click on Run as administrator
  2. In elevated Command Prompt, type the command listed below and hit Enter to execute it.
sfc /scannow
SFC command DISM
  1. Once the command is executed, restart your PC and check if the error is resolved. If not, then open the elevated Command Prompt again. 
  2. This time, type the command mentioned below and hit Enter
Dism /Online /Cleanup-Image /RestoreHealth
Restore Health Command
  1. Finally, restart your PC again. 

Hopefully, this will resolve the issue once and for all.

This wraps up our guide on fixing the error code 0x8007065E in Windows. We hope that one of the methods mentioned in this guide did the trick for you. If you have any questions regarding the methods listed above, please let us know in the comment section below.

If this guide helped you, please share it. 🙂


  • Zainab Falak

    Zainab Falak is a staff writer for Saint and an expert in Microsoft Windows, having authored more than 200 posts. She has a Bachelors in Actuarial Sciences and her passion for computers extends to exploring various aspects, from UI customization to the Windows registry and exploring error codes. Twitter LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts